Choir Miking Made Simple.
Integrated choir miking system with 30kHz cardioid microphone, low profile microphone stand and boom.
Unflinching Focus
A near-perfect cardioid polar pattern, with 32dB of rear rejection.
Less is Truly More
A wide coverage area means fewer mics and no spotlighting. Your choir will be heard as one unified voice.
Fully Flexible
The microphone head can be positioned as high as 7 feet and as low as 1.5 feet from the floor. Plus, the microphone cable plugs into the base of the microphone, making it incredibly low profile and clean.
Options
The FlexWand™ microphones have cast iron or tripod base options. Available in cardioid or hypercardioid. Matched pairs available.
Specifications
| FREQUENCY RESPONSE |
20Hz – 30kHz |
| POLAR PATTERN |
Cardioid |
| SENSITIVITY |
10mV/Pa (-40dBV/Pa) |
| POWER REQUIREMENTS |
24-48V Phantom, 10mA |
| SIGNAL TO NOISE RATIO |
78dB (A-weighted) |
| PEAK ACOUSTIC INPUT |
145dB SPL |
| OUTPUT |
XLR (pin 2+) |
| OUTPUT IMPEDANCE |
65Ω balanced (between pins 2 & 3) |
| MIN OUTPUT LOAD |
600Ω between pins 2 & 3 |
| SELF NOISE |
16dB SPL equivalent (A weighted) |
| DIMENSIONS |
Stand 7’ 2” long (2.18m), Base 12” (30.5cm) in diameter, (2.7cm) high |
| POSITIONING RANGE |
From 1′ 6″ to 7′ above floor level |
| WEIGHT |
Stand 2 lbs. (.9 kg), Base 12.6 lbs. (5.7kg) |